- Your one stop shop for KNX devices in the USA 🇺🇸
- (+1) 786 956 6821
- support@knxsupply.com
- Store Location
- Sign in or Register
- Home
-
Categories
- System Devices
- Switching/Shutter Actuators
- Dimming Actuators
- HVAC
- Binary Inputs
- Keypads
- Gateways
- Enclosures and Boxes
- Occupancy Sensors
- Visualization Systems and Touch Panels
- Weather Sensors
- Drivers and ECGs
- Special Sensors
- HVAC
- Accessories
- Cable
- Expert Picks
- KNX Certified Training
- Newest Products
- Best Selling Products
- Articles
- Contact Us
Your cart is empty
- Home
- All Collections
- LUNATONE
Filter
LUNATONE
Filter
Showing 1 - 20 of 59 items
- Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
- Bidirectional data communication for DALI bus monitoring, configuration and control.
- Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
- USB and DALI-line are galvanically isolated.
- Supply via DALI-line and USB interface
- Various types available: Standard Mini, with integrated 30mA bus power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory Wireless.
- 2 sets of DALI terminals for easy connection - signal line can be looped through
Communication interface between PC and modules on a DALI Bus.
- The DALI-2 USB is recognized as hardware interface / serial port interface. Windows 10 and higher includes automatic drivers for recognizing the device. Drivers for windows 7 and lower are available on request.
- After installation the device can be found in the Windows Device Manager section “Ports (COM)”
- The DALI-2 USB supports the transmission and monitoring of Standard DALI commands as well as several proprietary protocol extensions.
More info: https://www.lunatone.com/wp-content/uploads/2023/01/24138215_DALI-2_USB30mA_EN_D0114.pdf
- 24V DC Power Supply
- maximum output current 300mA
- DIN Rail Module
- with Status LED
Overview
- Small interface module for the conversion of 0-10V control signals to DALI dim levels
- Devices with 1, 2 and 3 channels available
- The 0-10V voltage is transformed to a a DALI dim level and DALI-command Off and sent to the defined effective range on the DALI line
- A change on the 0-10V input voltage (<1%) is used as event trigger
- Supply voltage 12V to 24V DC (e.g. 24V/300mA Art.Nr. 24166012-24HS), multiple devices can be supplied by the same supply voltage
- Configuration of effective range and conversion characteristic (conversion curve and behaviour below 1V input voltage) via DALI-Cockpit and DALIUSB-interface
Overview
- Module with a serial interface to communicate with components in a DALI-line via RS232
- A simple way to connect a PC or PLC to a DALI network.
- Bidirectional data transfer
- Addressing, configuration, status requests and monitoring
- Collision detection
- Support for several proprietary DALIprotocol extensions.
- Electrical isolation
- No external power supply necessary; the device is supplied via the DALI bus and the serial interface.
- Double DALI-terminals
- New version with LUBA Protocol: Art Nr.: 24166096-LU-HS
- Version with integrated 240mA bus power supply: see datasheet for RS232-PS (Article Nr.:24166096-PS)
- Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
- Bidirectional data communication for DALI bus monitoring, configuration and control.
- Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
- USB and DALI-line are galvanically isolated.
- Supply via DALI-line and USB interface
- Various types available: Standart, mini, with integrated 30mA bus, power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory, wireless
- 2 sets of DALI terminals for easy connection - signal line can be looped through
Overview
- DALI bus power supply unit.
- Guaranteed supply current 100mA.
- Maximum supply current 130mA.
- Suitable to power a DALI-line with up to 50 standard DALI ballasts.
- Suitable for back box installation and integration in protection class II devices.
- Power supply range 24Vdc … 48Vdc.
- DALI LED-Dimmer for RGBW color control
- Suitable for constant current LEDmodules
- Operating Mode DT8: one DALIaddress for the independent control of level and color (DALI DT8, Type RGBWAF)
- Operating Mode Color&Dim
- SwitchDim2
- Dimming range 0.1%-100%
- Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz).
- Types with common plus and minus connector for constant currents up to 700mA.
- Independent electrical device, suitable for integration in luminaires (protection class II) or remote ceiling.
- Supply voltage 12V to 48V DC.
- Output voltage up to 45VDC.
- High efficiency.
- Configuration via PC-software DALICockpit and DALI interface (e.g. DALI USB).
Overview
- DALI LED-Dimmer for RGB colour control suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
- Operating Mode DT8: one DALIaddress for the independent control of light level and colour (DALI DT8, Type RGBWAF)
- Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
- supply voltage 12V to 48V DC (according to the operating voltage of the led modules)
- Type dependent max. input currents of 4A, 8A, 10A or 16A
- The maximum input current can be freely distributed between the channels.
Overview
- Device with 2 DALI Tunable White LED-Dimmer
- For constant voltage LED modules (12V-48V)
- 2 DALI addresses (Device Type 8, Colour Type Tc)
- Independent control of light level and color temperature
- Dimming range: 1%-100%, PWM frequency: 488Hz DIN rail mounting compatible.
- Supply voltage: 12V-48V DC, Input current: 0.1A-16A
- Low standby losses, High efficiency >98%
- Configuration via DALI-Cockpit software and DALI USB interface
Overview
- DALI LED-Dimmer for the control of tunable white luminaires
- Suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
- Operating Mode DT8: One DALIaddress for the independent control of light level and colour temperature (DALI DT8, Colour Type Tc)
- Operating Mode Balance&Dim: Control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the channel balance (e.g. colour temperature)
- Operating Mode Dim2Warm: one DALI-address for simultaneous adjustment of light level and colour temperature
- SwitchDim2: 2 switch-inputs offer control of level and colour without DALI
- Dimming range 0.1%-100%
- Type dependent max. input currents of 4A, 8A, 10A or 16A
- The maximum input current can be freely distributed between the channels
- Low standby power consumption
- High efficiency
- Configuration via PC-software DALICockpit and DALI USB-interface
- User-friendly factory default settings
Overview
- 4 channel DALI LED-Dimmer
- Suitable for constant current LEDmodules
- Operating Mode DT6: individual channel control via 4 DALI addresses
- Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
- SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
- Dimming range 0.1%-100%
- Types with common minus connector (GM) with constant currents up to 700mA
- Independent control gear, suitable for integration in luminaires (protection class II) and remote ceiling
- Supply voltage 12V to 48V DC
- Output voltage up to 45VDC
- Short circuit protection
- Low standby power consumption
- High efficiency
Overview
- 4 channel DALI LED-Dimmer
- Suitable for constant current LEDmodules
- Operating Mode DT6: individual channel control via 4 DALI addresses
- Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
- SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
- Dimming range 0.1%-100%
- Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz)
- Types with common plus connector with constant currents up to 500mA
Overview
- 4-channel DALI LED Dimmer for constant current LED modules.
- Operating Modes:
- DT6: 4 DALI addresses for channel control.
- Colour&Dim: 2 DALI addresses for light and color.
- SwitchDim2: Control without DALI using 2 switch inputs.
- Dimming: 0.1% to 100% range.
- PWM Frequency: 122Hz to 1kHz options.
- Connectors: Common plus (up to 500mA) and minus (GM) (up to 700mA).
- Power: 12V-48V DC input, up to 45VDC output.
- Features: Short circuit protection, low standby power, high efficiency.
- Configuration: DALICockpit software and DALI interface.
- User-friendly default settings.
Overview
- The 4-channel DALI LED Dimmer is designed for constant current LED modules.
- It offers two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for adjusting light levels and one for color.
- In SwitchDim2 mode, it provides light and color control through 2 switch inputs without DALI.
- It comes in versions with either a common plus connector supporting up to 500mA or a common minus connector (GM) supporting up to 700mA.
- It is an independent control gear suitable for integration into luminaires (Class II) and remote ceiling applications.
- The supply voltage ranges from 12V to 48V DC, with an output voltage up to 45V DC.
- The dimmer includes short circuit protection, low standby power consumption, and high efficiency. Configuration is done via DALICockpit PC software and a DALI interface (e.g., DALI USB).
Overview
- The 4-channel DALI LED Dimmer is designed for constant current LED modules.
- It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
- Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
- The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
- It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
- The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
- This flexibility makes it a versatile choice for various lighting applications, ensuring effective control and integration in different setups.
Overview
- The 4-channel DALI LED Dimmer is designed for constant current LED modules.
- It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
- Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
- The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
- It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
- The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
Overview
- The 4-channel DALI LED Dimmer is designed for constant current LED modules.
- It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
- Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
- The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
- It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
- The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
Overview
- The 3-channel DALI LED Dimmer is designed for constant voltage LED modules operating between 12V and 48V.
- It offers two main operating modes:
- DT6: Each channel can be controlled via its own DALI address (3 addresses total).
- Colour&Dim: Uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
- SwitchDim2: Provides control via 2 switch inputs for light level and color without DALI.
- The dimmer supports a range of 0.1% to 100% dimming and features adjustable PWM frequencies (122Hz, 244Hz, 488Hz, 976Hz; with firmware version 4.6 and later, frequencies are 250Hz, 500Hz, 1kHz).
- It is compact for integration in luminaires and remote ceiling applications.
- The supply voltage ranges from 12V to 48V DC, with maximum input currents of 4A, 8A, 10A, or 16A, which can be distributed among the channels (max 10A per channel).
- The dimmer is energy-efficient with low standby power consumption and is configurable via PC software DALICockpit and a DALI USB interface.
- It includes user-friendly factory default settings.
Expert picks
$295.00
$45.00
$349.54
Newest Products
$1,330.00
$349.54
KNX Training
$1,200.00
$1,500.00