Products

Overview

• Module with a serial interface to communicate with components in a DALI-line via RS232
• A simple way to connect a PC or PLC to a DALI network.
• Bidirectional data transfer
• Addressing, configuration, status requests and monitoring
• Collision detection
• Support for several proprietary DALIprotocol extensions.
• Electrical isolation
• No external power supply necessary; the device is supplied via the DALI bus and the serial interface.
• Double DALI-terminals
• New version with LUBA Protocol: Art Nr.: 24166096-LU-HS
• Version with integrated 240mA bus power supply: see datasheet for RS232-PS (Article Nr.:24166096-PS)

Communication interface between PC and modules on a DALI Bus.

• The DALI-2 USB is recognized as hardware interface / serial port interface. Windows 10 and higher includes automatic drivers for recognizing the device. Drivers for windows 7 and lower are available on request.
• After installation the device can be found in the Windows Device Manager section “Ports (COM)”
• The DALI-2 USB supports the transmission and monitoring of Standard DALI commands as well as several proprietary protocol extensions.

More info: https://www.lunatone.com/wp-content/uploads/2023/01/24138215_DALI-2_USB30mA_EN_D0114.pdf

KNX Secure: effective data protection!

Digital data transmission and networking greatly simplify our daily lives, but make us more susceptible to tampering or attacks on smart home installations.

This is because anything that can be controlled digitally could theoretically also be controlled by unauthorised third parties.

This is where KNX Data Secure comes in!

Thanks to encryption and authentication, KNX Data Secure effectively protects data transmission from unauthorised access and manipulation, giving your smart home the highest security standards on the market.

KNX Data Secure is a guarantee of security and privacy, which is why DIVUS has chosen it for its products, such as the new DIVUS KNX IQ08 TPS touch panel!

The powerful software for your professional career. ETS Professional offers all the required functionalities to realize your home or building control project from start to finish.

• Version: ETS6 Professional
• License: Cloud version
• Max. KNX devices: No limit

Purchase your licensed ETS6 Professional software directly from us.

Once your order is complete, we'll reach out for your my.knx.org account details to assign your cloud license.

It's a simple process - just connect to your myKNX account through ETS and link your license!

⬇️ Download DEMO version

Features

• AC input range: 85~264Vac (277Vac available)
• Operating temperature range: -30~+70°C
• Safety approvals: UL60950-1, UL508
• High efficiency
• Pass LPS
• Class II isolation
• Installed on DIN rail TS35 / 7.5 or 15
• LED indicator for power on
• Low no load power consumption: <0.3W
• Adjustable DC output voltage
• Standard protections: short circuit / over load / over voltage
• MEAN WELL 3 year warranty

Enclosure in desktop version with external network cable – hardware-software solution for network management.

As the heart of a building automation project, DIVUS HEARTBEAT ensures security as well as stability and enables easy network setup and maintenance.

• Integrated VoIP server;
• VoIP call logging;
• Three pre-configured and physically separated networks: DIVUS HOME, SECURE and INTERCOM;
• Firewall protection of the HOME and SECURE networks from the external INTERCOM network;
• DHCP and NTP server for the SECURE intranet;
• Automated email reports;
• Network scanning and diagnostic software with reporting;
• Automatic creation of network topology diagrams;
• Advanced information retrieval from connected DIVUS units;
• Remote DIVUS-Support 
• HEARTBEAT Manager Slim quantity

Information

From electricity meter to heating. With the SMART CONNECT KNX Programmable, third-party devices can be connected to the KNX bus in a simple and reliable way.

This enables individualised connection logic to be developed in just a few days.

The barrier to the world of building automation has never been this low.

Features:

• Programming of the application in C# or VB.Net

• Up to 64 KNX communication objects (variable bit length)

• Version 1-0004-005: 1x IP and 1x USB connection

• Version 1-0005-006: 2x IP connection

• Ready-certified KNX device (can be completely configured via ETS) *

• Extensions via firmware updates

The KNX certification for the SMART CONNECT KNX Programmable is limited to the interworking ability with KNX products from other manufacturers.

• The JB260C23 Binary Input is a KNX device with four binary input channels.
• The device is installed in a 4 x 4 inch junction box.
• The bus is connected via a bus terminal block.  
• The device electronics are supplied via the bus voltage. 
• The device enables recording of statuses (contact is opened or closed respectively voltage is applied or not) and changes in status (contact is being opened or closed respectively voltage is rising or falling), as well as voltage impulses. 

• The JB512C23 Switching actuator (relay) is a KNX device with one switching output.
• The device is installed in a 4 x 4 inch junction box.
• The bus is connected via a bus terminal block.
• The actuator electronics are supplied via the bus voltage.
• The JB512C23 can switch resistive loads (e.g. electrical heaters, incandescent lamps, high voltage halogen lamps), inductive loads (e.g. motor, low voltage halogen lamps with intermediate conventional transformers), or capacitive loads (e.g. low voltage halogen lamps with intermediate electronic transformers).

• The JB513C23 Binary Output (relay) is a KNX device with three switching outputs. The device is installed in a 4 x4 inch junction box. The bus is connected via a bus terminal block.
• The actuator electronics are supplied via the bus voltage.
• The JB513C23 can switch resistive loads (e.g. electrical heaters, incandescent lamps, high voltage halogen lamps), inductive loads (e.g. motor, low voltage halogen lamps with intermediate conventional transformers), or capacitive loads (e.g. low voltage halogen lamps with intermediate electronic transformers).
• Each actuator output may be configured independently to provide switching, manual override, forced control, logical gate and status reporting. 

• The JB520C23 solar protection actuator is a KNX device with one relay output.
• The device is installed in a 4 x 4 inch junction box.
• The bus is connected via a bus terminal block. The actuator electronics are supplied via the bus voltage.
• The JB520C23 may be used to control blinds, shutters, awnings, windows, or doors.
• The device is designed to drive (per channel) one AC 120V drive (motor) with electromechanical limit switches or with integrated electronics for disconnection at the limit positions.

•  Their travel times must be manually measured as precisely as possible and configured in the application program.
• Parallel operation of several drives on one channel requires using a special separation relay. If such a separation relay is connected to the output to drive several drives in parallel, then the travel time must be configured manually.
• If the device is configured for automatic detection of the travel time, then parallel operation of several drives with electromechanical limit switches or mixed operation with drives with integrated electronics for disconnection at the limit positions is not permitted.

• Output for switching and dimming resistive, inductive or capacitive loads
• Automatic adjustment to leading edge or trailing edge control, depending on the type of load
• Rated frequency 50...60 Hz
• Electronic protection of the output against overload, short circuit and temperature rise
• Bus-powered electronics
• Integrated bus coupling unit, Bus connection via bus terminal block
• Type of protection: IP 20
• Rated operational voltage AC 120 V

• Protruding wires stranded AWG 12
• A phase connection for an output that is equipped with a relay contact per output as a switching element
• Contact rated operational voltage AC 120 V, AC 230 V, AC 277 V, AC 347 V
• Contact rated operational voltage AC/DC 24 V
• Contact rated current according to DIN EN 60669-1: 16 A / 20 A (resistive load)
• Fluorescent lamp load according to DIN EN 60669-1: 16 AX / 20 AX (200 µF) at AC 230 V
• Bus-powered electronics
• Integrated bus coupling unit
• Bus connection via bus terminal

• The device can be configured with Desigo Room Automation commissioning tool (ABT) or with KNX Engineering Tool Software (ETS).
• Protruding wires stranded AWG 12
• A phase connection for an output that is equipped with a relay contact per output as a switching element
• Contact rated operational voltage AC120 V, AC 230 V, AC 277 V, AC 347 V
• Contact rated operational voltage AC / DC 24 V
• Contact rated current according to DIN EN 60669-1: 16 A / 20 A (resistive load)
• Fluorescent lamp load according to DIN EN 60669-1: 16 AX / 20 AX (200 µF) at AC 230 V
• Bus-powered electronics
• Integrated bus coupling unit
• Bus connection via bus terminal
• Red LED for display of the activation of the addressing mode as well as the operational readiness

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

KNX Module for Raspberry Pi.

Application area

The KNX BAOS Module 838 kBerry is an extension board for the Raspberry PI® single-board computer.

It can be plugged directly on the Raspberry board and serves as a serial interface to KNX.

BAOS stands for “Bus Access and Object Server”.

So the module allows the access to the KNX bus on telegram level (KNX Link Layer) as well as on data point level (KNX Application Layer).

The connection between application and KNX BAOS Module is established via a UART connection (FT1.2 framing).

For a quick start a generic ETS® entry with 1000 group objects is available.

Individual ETS entries can be created as well.

The KNX BAOS Module 838 is powered via the bus and provides galvanic isolation.

The firmware of the KNX BAOS Module 838 is fully compatible with the KNX BAOS Module 830.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.