Products

DALI control module with four GP inputs for pushbutton switches and potentiometers.

Overview

• DALI-2 control module with 2 switching inputs for mains voltage
• Version with integrated DALI Bus power supply (50mA) – article number: 86458507-1L-PS
• Galvanic isolation between switching input and DALI-line  
• Application controller: different DALI commands, destination addresses and switching modes can be assigned to each input.
• Multi-master capability, several modules can be installed on the same DALI-line.
• DALI DT8 support for adjustable white luminaires with the help of special macros

Overview

• DALI control module with 4 switching inputs for mains voltage
• Galvanic isolation between switching input and DALI-line
• Configurable function for each input
• Destination address, switching mode and DALI-commands can be assigned to each input
• DALI DT8 support for adjustable white luminaires with the help of special macros Adjustable „power up“-function
• The function of the switching input can be configured with the help of the DALI Cockpit and a DALI USB interface
• Multi-master capability, several modules can be installed on the same DALI-line
• Suitable for installation in protection class II devices or back box installation

Overview

• DALI control module with 4 switching inputs for mains voltage
• Galvanic isolation between switching input and DALI-line
• Configurable function for each input
• Destination address, switching mode and DALI-commands can be assigned to each input
• DALI DT8 support for adjustable white luminaires with the help of special macros
• Adjustable „power-up“-function
• The function of the switching input can be configured with the help of the DALI Cockpit and a DALI USB interface
• Multi-master capability, several modules can be installed on the same DALI-line
• Suitable for installation in protection class II devices or back box installation

Overview

• The DALI dimmer is designed for dimming 230V LED retrofit bulbs via DALI (Device Type 4 from firmware 3.0 onward). 
• It is available in various types to support different loads: 3W to 25W (PD) for back box installation and 10W to 300W (PD300) for remote ceiling and DIN rail installations.
• The dimmer supports trailing edge phase cut for resistive and capacitive loads, leading edge phase cut for resistive and inductive loads, and is also available as a universal dimmer.
• It converts the DALI dim level into a phase cut controlled voltage, either trailing or leading edge. 
• The minimum dim level can be set via DALI (MIN LEVEL), and an additional operating mode as a switch (DT7 compliant) is available from firmware 3.5 onward. 
• The module functions as a DALI-line client, possessing its own DALI address.
•  It also features double DALI terminals, allowing the DALI signal line to be connected through.

Overview

• The DALI dimmer is designed for dimming 230V LED retrofit bulbs via DALI (Device Type 4 from firmware 3.0 onward).
• It is available in various types to support different loads: 3W to 25W (PD) for back box installation and 10W to 300W (PD300) for remote ceiling and DIN rail installations.
• The dimmer supports trailing edge phase cut for resistive and capacitive loads, leading edge phase cut for resistive and inductive loads, and is also available as a universal dimmer.
• It converts the DALI dim level into a phase cut controlled voltage, either trailing or leading edge.
• The minimum dim level can be set via DALI (MIN LEVEL), and an additional operating mode as a switch (DT7 compliant) is available from firmware 3.5 onward.
• The module functions as a DALI-line client, possessing its own DALI address.
• It also features double DALI terminals, allowing the DALI signal line to be connected through.

Overview

• The DALI dimmer is designed for dimming 230V LED retrofit bulbs via DALI (Device Type 4 from firmware 3.0 onward).
• It is available in various types to support different loads: 3W to 25W (PD) for back box installation and 10W to 300W (PD300) for remote ceiling and DIN rail installations.
• The dimmer supports trailing edge phase cut for resistive and capacitive loads, leading edge phase cut for resistive and inductive loads, and is also available as a universal dimmer.
• It converts the DALI dim level into a phase cut controlled voltage, either trailing or leading edge.
• The minimum dim level can be set via DALI (MIN LEVEL), and an additional operating mode as a switch (DT7 compliant) is available from firmware 3.5 onward.
• The module functions as a DALI-line client, possessing its own DALI address.
• It also features double DALI terminals, allowing the DALI signal line to be connected through.

Overview

• DALI bus power supply unit
• Guaranteed Supply Current 128mA
• Maximum Supply Current 250mA
• Suitable to power an entire DALI-line with 64 standard DALI ballasts
• Independent electronic device for remote ceiling and integration in protection class II devices
  power supply range 110Vac … 240Vac for worldwide use
• Surge immunity up to 400V 

Overview

• DALI bus power supply unit
• Guaranteed Supply Current 200mA
• Maximum Supply Current 250mA
• Suitable to power an entire DALI-line with 64 standard DALI ballasts
• Independent electronic device for remote ceiling and integration in protection class II devices
• Power supply range 110Vac … 240Vac for worldwide use
• Surge immunity up to 400V

Overview

• DALI bus power supply unit
• Guaranteed Supply Current 30mA for Version 24033444-30, and. 80mA for Version 24033444-80
• Maximum supply current allowed on a DALI line in total: 250mA
• Version 24033444-30 is suitable to power a DALI-line with up to 15 standard DALI ballasts
• Version 24033444-80 is suitable to power a DALI-line with up to 40 standard DALI ballasts
• Suitable for back box installation and integration in protection class II devices
• Power supply range 110Vac … 240Vac for worldwide use
• Surge immunity up to 400V

Overview

• DALI bus power supply unit
• Guaranteed Supply Current 30mA for Version 24033444-30, and. 80mA for Version 24033444-80
• Maximum supply current allowed on a DALI line in total: 250mA
• Version 24033444-30 is suitable to power a DALI-line with up to 15 standard DALI ballasts
• Version 24033444-80 is suitable to power a DALI-line with up to 40 standard DALI ballasts
• Suitable for back box installation and integration in protection class II devices
• Power supply range 110Vac … 240Vac for worldwide use
• Surge immunity up to 400V

Overview

• DALI bus power supply unit.
• Guaranteed supply current 100mA.
• Maximum supply current 130mA.
• Suitable to power a DALI-line with up to 50 standard DALI ballasts.
• Suitable for back box installation and integration in protection class II devices.
• Power supply range 24Vdc … 48Vdc.

Overview

• Device to enhance the maximum DALI cable length from 300m up to 600m.
• Enhancement and Transmission of the DALI-signals (bidirectional).
• Galvanic separation between DALIcircuits.
• Either radially arranged network layout or cascaded system mounting operated with single master.
• Cascading (Series wiring) of up to 3 repeaters
• The maximum amount of DALI-devices in the total network is limited to 64, the devices can be divided on the subcircuits freely.
• For each subordinate DALI circuit, a separate bus power supply is needed. (DALI PS)
• Type with integrated power supply available
• Repeater PS: Test button for simple function check of all DALI bus ballasts.
• Repeater PS: Module for DIN rail mounting and for remote ceiling installation available.

Overview

• Device to enhance the maximum DALI cable length from 300m up to 600m.
• Enhancement and Transmission of the DALI-signals (bidirectional).
• Galvanic separation between DALIcircuits.
• Either radially arranged network layout or cascaded system mounting operated with single master.
• Cascading (Series wiring) of up to 3 repeaters
• The maximum amount of DALI-devices in the total network is limited to 64, the devices can be divided on the subcircuits freely.
• For each subordinate DALI circuit, a separate bus power supply is needed. (DALI PS)
• Type with integrated power supply available
• Repeater PS: Test button for simple function check of all DALI bus ballasts.
• Repeater PS: Module for DIN rail mounting and for remote ceiling installation available.

Overview

• Multimaster capable, multiple modules can be installed on the DALI-line
• The module is supplied directly by th DALI-line, no additional supply required
• Mmounting on cavity walls or conduit boxes
• Various cross plates available as accessory
• Application controller: freely assignable
• Function for each button for direct control of luminaires
• Factory settings provide common functions (switch and dim) without need of configuration
• Easy configuration via DALI USB and DALI Cockpit Software tool
• Individual addresses (0-63), group addresses (0-15) or broadcast can be used as effective range
• Different switching modes can be assigned to each pushbutton (short, long press; toggle; etc.)

DT5 Converter Module for the integration of 0-10V drivers with electrically isolated control output (+/-1mA) in DALI lighting systems. 

Replaces Art. Nr. 86458508-OS

Overview

• Control device for DALI-systems
• 4 standard layouts for colour and colour temperature control and Switching/Dimming
• Individual layout configuration (up from firmware 4.8)
• Configuration with DALI-Cockpit software tool and DALI-USB interface
• Multimaster capable - multiple touch panels can be installed on the same DALI-line.
• Frame material in plastic
• Customized frame colours and directly printed surface for OEM
• The DALI touch panel can be mounted on a conduit box.
• The module is supplied directly via the DALI signal line

Overview

• DALI Touchpanel with Bluetooth 4.0 interface
• DALI-System control via Panel or via Android or IOS mobile device
• App for IOS and Android available
• All bluetooth moduls within the reception area will be listed for selection
• Up to 32 layouts configurable
• 5 preset designs available for color and colortemperature control as well as for switching and dimming with free configurable buttons
• Pin-code protection
• Configuration of the DALI Touch BT with DALI-Cockpit software tool und DALI-USB Interface
• Individual layout configuration: button arrangement and configuration of functions

• Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
• Bidirectional data communication for DALI bus monitoring, configuration and control.
• Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
• USB and DALI-line are galvanically isolated.
• Supply via DALI-line and USB interface
• Various types available: Standard Mini, with integrated 30mA bus power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory Wireless.
• 2 sets of DALI terminals for easy connection - signal line can be looped through

• Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
•  Bidirectional data communication for DALI bus monitoring, configuration and control.
• Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
•  USB and DALI-line are galvanically isolated.
• Supply via DALI-line and USB interface
• Various types available: Standart, mini, with integrated 30mA bus, power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory, wireless
• 2 sets of DALI terminals for easy connection - signal line can be looped through