Products

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.

Overview

• 4-channel DALI LED Dimmer for constant current LED modules.
• Operating Modes:
• DT6: 4 DALI addresses for channel control.
• Colour&Dim: 2 DALI addresses for light and color.
• SwitchDim2: Control without DALI using 2 switch inputs.
• Dimming: 0.1% to 100% range.
• PWM Frequency: 122Hz to 1kHz options.
• Connectors: Common plus (up to 500mA) and minus (GM) (up to 700mA).
• Power: 12V-48V DC input, up to 45VDC output.
• Features: Short circuit protection, low standby power, high efficiency.
• Configuration: DALICockpit software and DALI interface.
• User-friendly default settings.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
•  It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
•  Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
• This flexibility makes it a versatile choice for various lighting applications, ensuring effective control and integration in different setups.

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz)
• Types with common plus connector with constant currents up to 500mA 

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It offers two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for adjusting light levels and one for color.
• In SwitchDim2 mode, it provides light and color control through 2 switch inputs without DALI. 
• It comes in versions with either a common plus connector supporting up to 500mA or a common minus connector (GM) supporting up to 700mA.
• It is an independent control gear suitable for integration into luminaires (Class II) and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with an output voltage up to 45V DC.
• The dimmer includes short circuit protection, low standby power consumption, and high efficiency. Configuration is done via DALICockpit PC software and a DALI interface (e.g., DALI USB).

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Types with common minus connector (GM) with constant currents up to 700mA
• Independent control gear, suitable for integration in luminaires (protection class II) and remote ceiling
• Supply voltage 12V to 48V DC
• Output voltage up to 45VDC
• Short circuit protection
• Low standby power consumption
• High efficiency

Overview

• 4 channel relay control
• For the control of switched ballast via DALI
• Suitable for circuit breakers and relays with coils-voltages of 12V to 48V DC
• 4 DALI adresses, one for each channel (Device Type 7)
• Configuration with DALI-Cockpit software tool and DALI USB-Interface
• 2 types of housing
• Maximum input current 8A
• Maximum output current of 2A per channel 

Overview

• Independent light control of up to 256 DALI ballasts on 4 DALI-lines
• Configuration via Ethernet and PCsoftware tool DALI Cockpit.
• Modbus TCP access (control & visualisation).
• With the DALI4Net control devices (input devices and sensors) and control devices on each DALI-line can be configured (Ethernet/DALI Interface).
• Addressing, configuration, status queries, monitoring.
• Collision detection.
• DIN rail mounting.
• 24V power supply (e.g. 24V/300mA Art.Nr. 24166012-24HS).
• Basic version and standard version with additional central functions available.

Overview

•  Independent light control of up to 256 DALI ballasts on 4 DALI-lines
• Configuration via Ethernet and PCsoftware tool DALI Cockpit
• Modbus TCP access (control & visualisation)
• With the DALI4Net control devices (input devices and sensors) and control devices on each DALI-line can be configured (Ethernet/DALI Interface)
• Addressing, configuration, status queries, monitoring
• Collision detection
• DIN rail mounting
• 24V power supply (e.g. 24V/300mA Art.Nr. 24166012-24HS)
• Basic version and standard version with additional central functions available

Overview   

• Control device for DALI DT8 uminaires (colour mode Tc)
• Ciorhythmic time-adjusted colour temperature (Tc) reference value
• DALI real time clock
• Daylight saving time (DST) Configurable scene behaviour (firmware 1.5+) Light level curve (firmware 2.0+)
• The time and the colour temperature characteristics over time can be configured with the help of the DALI Cockpit software tool
• The DALI CDC module is supplied directly via the DALI line, no additional power supply is required.
• A battery is included, the clock is set to local time (GMT+1) as factory default
• Simple installation due to DALI double-clamp connector
• Types for backbox installation and DIN rail mounting, suitable for installation in protection class II devices

Overview

• Control device for DALI DT8 uminaires (colour mode Tc)
• Ciorhythmic time-adjusted colour temperature (Tc) reference value
• DALI real time clock
• Daylight saving time (DST)
• Configurable scene behaviour (firmware 1.5+)
• Light level curve (firmware 2.0+)
• The time and the colour temperature characteristics over time can be configured with the help of the DALI Cockpit software tool
• The DALI CDC module is supplied directly via the DALI line, no additional power supply is required.
• A battery is included, the clock is set to local time (GMT+1) as factory default
• Simple installation due to DALI double-clamp connector
• Types for backbox installation and DIN rail mounting, suitable for installation in protection class II devices

Overview

• Device with 2 DALI Tunable White LED-Dimmer
• For constant voltage LED modules (12V-48V)
• 2 DALI addresses (Device Type 8, Colour Type Tc)
• Independent control of light level and color temperature
• Dimming range: 1%-100%, PWM frequency: 488Hz DIN rail mounting compatible.
• Supply voltage: 12V-48V DC, Input current: 0.1A-16A
• Low standby losses, High efficiency >98%
• Configuration via DALI-Cockpit software and DALI USB interface

Overview

• DALI LED-Dimmer for the control of tunable white luminaires
• Suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: One DALIaddress for the independent control of light level and colour temperature (DALI DT8, Colour Type Tc)
• Operating Mode Balance&Dim: Control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the channel balance (e.g. colour temperature)
• Operating Mode Dim2Warm: one DALI-address for simultaneous adjustment of light level and colour temperature
• SwitchDim2: 2 switch-inputs offer control of level and colour without DALI
• Dimming range 0.1%-100%
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels
• Low standby power consumption
• High efficiency
• Configuration via PC-software DALICockpit and DALI USB-interface
• User-friendly factory default settings

DALI LED Dimmer (CV, DT8) for the control of tunable white luminaires (CW-WW).

Overview

• DALI LED-Dimmer for RGB colour control suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: one DALIaddress for the independent control of light level and colour (DALI DT8, Type RGBWAF)
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• supply voltage 12V to 48V DC (according to the operating voltage of the led modules)
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels.

• DALI LED-Dimmer for RGBW color control
• Suitable for constant current LEDmodules
• Operating Mode DT8: one DALIaddress for the independent control of level and color (DALI DT8, Type RGBWAF)
• Operating Mode Color&Dim
• SwitchDim2
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz).
• Types with common plus and minus connector for constant currents up to 700mA.
• Independent electrical device, suitable for integration in luminaires (protection class II) or remote ceiling.
• Supply voltage 12V to 48V DC.
• Output voltage up to 45VDC.
• High efficiency.
• Configuration via PC-software DALICockpit and DALI interface (e.g. DALI USB).

Overview

• Device for DALI-line expansion
• Control of several DALI-devices via 3 DALI-addresses
• 3 DALI outputs (DALI A,B,C) with integrated DALI power supply (50mA each) for powering control gear and control devices
• For the superordinate DALI circuit the DALI expander acts like 3 separate DALI control gear – 3 DALI addresses, one for each subnet (A, B, C)
• Forwarding commands received at the input (DALI IN) to the corresponding output (DALI A, B, C) broadcast
• Alternative control options of the DALI-output circuits via Switch&Diminputs (Broadcast).
• Group commands are passed from one to the other output circuits (cross function)
• Galvanic isolation between DALI-input and DALI-outputs
• Independent control gear for remote ceiling an integration in luminaires

Overview

•  Device for DALI-line expansion
• Control of several DALI-devices via 3 DALI-addresses
•  3 DALI outputs (DALI A,B,C) with integrated DALI power supply (50mA each) for powering control gear and control devices
• For the superordinate DALI circuit the DALI expander acts like 3 separate DALI control gear – 3 DALI addresses, one for each subnet (A, B, C)
• Forwarding commands received at the input (DALI IN) to the corresponding output (DALI A, B, C) broadcast
• Alternative control options of the DALI-output circuits via Switch&Diminputs (Broadcast).
• Group commands are passed from one to the other output circuits (cross function)

Overview

• Device for simple DALI line expansion.

• Control of several DALI-devices via one DALI-address.

• For the superordinate DALI line the DALI Expander acts as a DALI EVG (DALI IN) with a single address.

• Output (DALI OUT) with DALI power supply (200mA) for the supply of DALI EVG's and DALI control modules.

• Forwarding commands received at the input (DALI IN) to the output (DALI OUT) broadcast.

• Alternative control options of the DALI-output line via Switch&Dim-input (Broadcast).