WEINZIERL
Combined dimming/switching actuator with 1 dimming output for active electronic ballasts and 1 switching output.
Application area
The KNX IO 546.1 secure (1D1O) is a compact combined dimming/switching actuator with 1 dimming output for active electronic ballasts with a 0/1-10V interface and 1 bi-stable relay output.
The dimming actuator can be used for several active electronic ballasts e.g. for LED panels or stripes.
The configuration allows controlling the channel by switching, rel.
Dimming and dimming value.
Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer.
The switching actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
Gateway between KNX DMX512.
Application area
The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 (protocol for lighting control) with up to 64 freely configurable channels.
In master mode, the device allows convenient control of DMX luminaires, for example with KNX push-buttons.
Up to 64 dimming channels or up to 8 RGB/RGBW channels are available.
Several subsets of DMX512 addresses can be assigned to each channel.
The dimming channels enable dimming of one or more DMX devices via KNX.
In addition, 4 sequencers are available in the gateway to carry out more complex tasks.
In slave mode KNX actuators can be controlled by DMX.
For example, the room lighting, which is part of the KNX installation, can be controlled via a DMX lighting control panel.
KNX LED dimming actuator 4-fold with constant current.
Application area
The KNX IO 536 CC (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current).
The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels.
Every configuration allows controlling the channel by switching, rel.
Dimming and dimming value.
Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer.
KNX LED dimming actuator 4-fold with constant voltage.
Application area
The KNX IO 534 CV (4D) is a compact RGB / RGBW /Tunable White dimming actuator with 4 PWM outputs.
The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent PWM dimmer channels.
Every configuration allows controlling the channel by switching, rel.
Dimming and dimming value.
Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer.
Switching actuator with 1 output and 2 binary inputs.
Application area
The KNX IO 532 (1D1O) is a compact combined dimming/switching actuator with 1 PWM dimming output for LEDs and 1 bi-stable relay output.
The dimming actuator can be used e.g. for LED panels or stripes.
Besides controlling the dimmer by switching, rel.
Dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function or staircase light.
The switching actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
Two push buttons and three LEDs allow a local operation and a visualization of the device state.
In addition to the output channels the device includes 16 independent functions for logic or timer control.
Universal dimming actuator and binary inputs with 1 230V dimming output for lights and 2 binary inputs.
Application area
The KNX IO 530 (1D2I) is a compact 230 V dimmer with 1 dimming output and 2 binary inputs.
The dimming actuator can be used for dimmable electric lights supplied with 230 V mains.
To cover a wide range of usable electric lights the KNX IO 530 can operate with trailing or leading edge dimming.
Besides controlling the light by switching, rel.
Dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function, staircase light and sequencer.
Blind actuator with 2 binary inputs.
Application area
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs.
The actuator is used to control a blind, a shutter or a window drive.
The relay contacts are electrically interlocked.
The inputs can be connected to conventional switches with an external voltage of 12 to 230 V.
In the not configured state the binary inputs control the actuator channel.
Via commissioning the device using ETS® software the binary inputs can be used independently.
Two push buttons and three LEDs allow a local operation and a visualization of the device state.
In addition to the output and input channels the device includes 16 independent functions for logic or timer control.
Switching actuator with 1 output and 2 binary inputs.
Application area
The KNX IO 511.1 secure (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs.
The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
The inputs can be connected to conventional switches with an external voltage of 12 to 230 V.
In ex-factory settings the inputs are connected internally to the actuator.
The actuator combined with input B1 serves as a latching relay.
Input B2 is used for zero crossing detection.
Switching actuator with 2 outputs.
Application area
The KNX IO 510.1 secure (2O) is a compact switching actuator with 2 bi-stable relay outputs.
The actuator provides the function for universal outputs including scene control, timer, staircase lightning and to control heating valves (PWM for thermoelectric valve drives).
Two push buttons and three LEDs allow a local operation and a visualization of the device state.
In addition to the output channels the device includes 16 independent functions for logic or timer control.
The device supports KNX Data Security.
Push button for extra low voltage for MATCH 55 series.
The 24V Push Button 436 is a push button for direct connection to push button inputs of e.g. smart home control panels, PLC controls or push button interfaces of any bus system.
The device is available with one or two rockers.
Each rocker offers two pressure points (up/down).
A pluggable connection cable is included in the scope of delivery.
The device is part of the MATCH 55 push button series.
With the supplied installation kit, the push button fits mechanically to numerous switch ranges available on the market with internal dimensions of 55 mm.
The push button is characterized by soft and quiet button press.
The optional terminal block enables the screwless connection of cables with a cross section of up to 0.75 mm².
KNX TP Push Button Interface with KNX Data Security.
Application area
The KNX TP Push Button Interface 420 secure is a push button interface for the KNX bus.
It is suitable as a binary input for connecting up to four conventional push buttons or potential-free contacts.
In addition, the device offers two outputs for LEDs.
A pluggable connection cable is included in the scope of delivery.
The integrated push buttons and LEDs allow a quick test of the configuration.
The application offers extensive functions for switching, dimming, shutter, valuator, scene and color control as well as sequence controllers and scalable pulse counters.
Each channel can be configured individually.
The flexible operating concept also allows different functions on one channel depending on the setting.
In addition, the device contains 10 independent logic or time functions.
The device supports KNX Data Security.
KNX TP Push Button with KNX Data Security For MATCH 55 series.
Application area
The KNX TP Push Button 420 secure is a push button with integrated bus coupling unit.
The device is available with one or two rockers.
Each rocker offers two pressure points (up/down).
The device is part of the MATCH 55 push button series.
With the supplied installation kit, the push button fits mechanically to numerous switch ranges available on the market with internal dimensions of 55 mm.
The soft and quiet push button operation allows the installation in bedrooms and living rooms.
The application offers extensive functions for switching, dimming, shutter, valuator, scene and color control as well as a sequence controller.
Each button on a rocker can be configured individually.
The flexible operating concept also allows different functions on one button depending on the setting.
The device also contains 10 independent logic or time functions.
The device supports KNX Data Security.
KNX TP Push Button with KNX Data Security For MATCH 55 series.
Application area
The KNX TP Push Button 420 secure is a push button with integrated bus coupling unit.
The device is available with one or two rockers.
Each rocker offers two pressure points (up/down).
The device is part of the MATCH 55 push button series.
With the supplied installation kit, the push button fits mechanically to numerous switch ranges available on the market with internal dimensions of 55 mm.
The soft and quiet push button operation allows the installation in bedrooms and living rooms.
The application offers extensive functions for switching, dimming, shutter, valuator, scene and color control as well as a sequence controller.
Each button on a rocker can be configured individually.
The flexible operating concept also allows different functions on one button depending on the setting.
The device also contains 10 independent logic or time functions.
The device supports KNX Data Security.
Binary input with 4 channels to control lights, shutter etc. Inputs suitable for dry contacts.
Application area
The KNX IO 411 (4Ii) is a compact binary input with 4 channels to control lights, shutter etc.
With conventional switches or contacts.
Inputs are designed for dry contacts.
Using as impulse counter is possible as well.
It can be used to connect energy meters with S0 output or anemometers.
Two push buttons and three LEDs allow a local operation and a visualization of the device state.
In addition to the input channels the device includes 16 independent functions for logic or timer control.
Binary input with 4 channels to control lights, shutter etc.
Installation Instructions
- The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.
640 mA Power supply with integrated USB interface, KNX node, and diagnosis functions.
Application area
The KNX PowerSupply USB 367 is a 640 mA power supply with an integrated USB interface and a small footprint of only 4 TE (72 mm).
The device has a bus choke and additionally provides an output for auxiliary power.
The USB interface allows establishing a bidirectional connection between a PC and the KNX bus.
The USB connector has a galvanic separation from the KNX bus.
Both ETS (Version 4.2 or later) and visualization tools support this interface.
The KNX node monitors output current, bus voltage and the temperature in the enclosure.
The configuration of the device is done with ETS.
An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.
640 mA Power supply with integrated KNX node, diagnosis and logical functions.
Application area
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm).
The device has a bus choke and additionally provides an output for auxiliary power.
The integrated KNX node monitors output current, bus voltage and the temperature in the enclosure. Various logic functions are available for application purpose.
The configuration is done with the ETS (version 4.2 or higher).
An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.
640 mA Power supply.
Installation Instructions
- The device may be used for permanent interior installations in dry locations, within distribution boards or small casings with DIN rail.
Compact USB interface between PC and KNX RF.
Application area
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
The device complies with the specification of KNX RF and supports the protocol cEMI.
The interface is compatible with ETS 5 (or higher).
For software integration (Windows or Linux) of this interface the free SDK kDrive express is available.
The power is supplied via the USB port.
