System Devices

• The device may be used for permanent interior installations in dry locations within distribution boards or small casings with DIN rail EN 60715-TH35. 
• To ensure an uninterrupted power supply a separate circuit with safety separation should be used for the power supply unit power supply line.

Input voltage

• Operation voltage: AC 110 - 277 V, 50...60Hz
• Rated power consumption approx. 3 W

Output voltage

• Rated voltage: DC 24 V (class 2)
• Safety extra low voltage (SELV)
• Permissible range: DC 21 ... 30 V

Output current

• Rated current 160 mA
• Short-circuit current: limited to 0.39 A

The USB-KNX interface OCI702 serves to provide a USB-KNX connection to access tools from a Microsoft Windows PC to a KNX network or individual device. It consists of the OCI702 service interface as well as several connection cables and accessories including cable ties and a service bag.

IP Interface Secure has the following attributes:

•  Easy to connect to higher-level systems by using the internet protocol (IP)
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Up to five KNXnet/IP tunneling connections are possible at the same time
• LED displays for operational readiness, KNX communication and IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)

The IP router has the following attributes:

• Easy to connect to higher-level systems by using the internet protocol (IP)
• Secure access and data transfer via KNXnet/IP Secure
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Fast communication between KNX lines, areas and systems (KNXnet/IP routing)
• Communication across buildings and properties (networking properties)
• Filtering and forwarding of telegrams according to: Physical address, Group address
• LED displays for Operational readiness, KNX communication, IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)