Newest Products

•  24V DC Power Supply
• maximum output current 300mA
• DIN Rail Module
• with Status LED

Communication interface between PC and modules on a DALI Bus.

• The DALI-2 USB is recognized as hardware interface / serial port interface. Windows 10 and higher includes automatic drivers for recognizing the device. Drivers for windows 7 and lower are available on request.
• After installation the device can be found in the Windows Device Manager section “Ports (COM)”
• The DALI-2 USB supports the transmission and monitoring of Standard DALI commands as well as several proprietary protocol extensions.

More info: https://www.lunatone.com/wp-content/uploads/2023/01/24138215_DALI-2_USB30mA_EN_D0114.pdf

• DALI LED-Dimmer for RGBW color control
• Suitable for constant current LEDmodules
• Operating Mode DT8: one DALIaddress for the independent control of level and color (DALI DT8, Type RGBWAF)
• Operating Mode Color&Dim
• SwitchDim2
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz).
• Types with common plus and minus connector for constant currents up to 700mA.
• Independent electrical device, suitable for integration in luminaires (protection class II) or remote ceiling.
• Supply voltage 12V to 48V DC.
• Output voltage up to 45VDC.
• High efficiency.
• Configuration via PC-software DALICockpit and DALI interface (e.g. DALI USB).

Overview

• DALI LED-Dimmer for RGB colour control suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: one DALIaddress for the independent control of light level and colour (DALI DT8, Type RGBWAF)
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• supply voltage 12V to 48V DC (according to the operating voltage of the led modules)
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels.

Overview

• Device with 2 DALI Tunable White LED-Dimmer
• For constant voltage LED modules (12V-48V)
• 2 DALI addresses (Device Type 8, Colour Type Tc)
• Independent control of light level and color temperature
• Dimming range: 1%-100%, PWM frequency: 488Hz DIN rail mounting compatible.
• Supply voltage: 12V-48V DC, Input current: 0.1A-16A
• Low standby losses, High efficiency >98%
• Configuration via DALI-Cockpit software and DALI USB interface

Overview

• DALI LED-Dimmer for the control of tunable white luminaires
• Suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: One DALIaddress for the independent control of light level and colour temperature (DALI DT8, Colour Type Tc)
• Operating Mode Balance&Dim: Control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the channel balance (e.g. colour temperature)
• Operating Mode Dim2Warm: one DALI-address for simultaneous adjustment of light level and colour temperature
• SwitchDim2: 2 switch-inputs offer control of level and colour without DALI
• Dimming range 0.1%-100%
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels
• Low standby power consumption
• High efficiency
• Configuration via PC-software DALICockpit and DALI USB-interface
• User-friendly factory default settings

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Types with common minus connector (GM) with constant currents up to 700mA
• Independent control gear, suitable for integration in luminaires (protection class II) and remote ceiling
• Supply voltage 12V to 48V DC
• Output voltage up to 45VDC
• Short circuit protection
• Low standby power consumption
• High efficiency

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz)
• Types with common plus connector with constant currents up to 500mA 

Overview

• 4-channel DALI LED Dimmer for constant current LED modules.
• Operating Modes:
• DT6: 4 DALI addresses for channel control.
• Colour&Dim: 2 DALI addresses for light and color.
• SwitchDim2: Control without DALI using 2 switch inputs.
• Dimming: 0.1% to 100% range.
• PWM Frequency: 122Hz to 1kHz options.
• Connectors: Common plus (up to 500mA) and minus (GM) (up to 700mA).
• Power: 12V-48V DC input, up to 45VDC output.
• Features: Short circuit protection, low standby power, high efficiency.
• Configuration: DALICockpit software and DALI interface.
• User-friendly default settings.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It offers two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for adjusting light levels and one for color.
• In SwitchDim2 mode, it provides light and color control through 2 switch inputs without DALI. 
• It comes in versions with either a common plus connector supporting up to 500mA or a common minus connector (GM) supporting up to 700mA.
• It is an independent control gear suitable for integration into luminaires (Class II) and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with an output voltage up to 45V DC.
• The dimmer includes short circuit protection, low standby power consumption, and high efficiency. Configuration is done via DALICockpit PC software and a DALI interface (e.g., DALI USB).

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
•  It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
•  Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
• This flexibility makes it a versatile choice for various lighting applications, ensuring effective control and integration in different setups.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.

Overview

• The 3-channel DALI LED Dimmer is designed for constant voltage LED modules operating between 12V and 48V.
• It offers two main operating modes:
• DT6: Each channel can be controlled via its own DALI address (3 addresses total).
• Colour&Dim: Uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• SwitchDim2: Provides control via 2 switch inputs for light level and color without DALI.
• The dimmer supports a range of 0.1% to 100% dimming and features adjustable PWM frequencies (122Hz, 244Hz, 488Hz, 976Hz; with firmware version 4.6 and later, frequencies are 250Hz, 500Hz, 1kHz).
• It is compact for integration in luminaires and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with maximum input currents of 4A, 8A, 10A, or 16A, which can be distributed among the channels (max 10A per channel).
• The dimmer is energy-efficient with low standby power consumption and is configurable via PC software DALICockpit and a DALI USB interface.
• It includes user-friendly factory default settings.

Overview

• The 3-channel DALI LED Dimmer is designed for constant voltage LED modules operating between 12V and 48V. It offers two main operating modes:
• DT6: Each channel can be controlled via its own DALI address (3 addresses total).
• Colour&Dim: Uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• SwitchDim2: Provides control via 2 switch inputs for light level and color without DALI.
• The dimmer supports a range of 0.1% to 100% dimming and features adjustable PWM frequencies (122Hz, 244Hz, 488Hz, 976Hz; with firmware version 4.6 and later, frequencies are 250Hz, 500Hz, 1kHz).
• It is compact for integration in luminaires and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with maximum input currents of 4A, 8A, 10A, or 16A, which can be distributed among the channels (max 10A per channel).

Overview

• The 3-channel DALI LED Dimmer is designed for constant voltage LED modules operating between 12V and 48V.
•  It offers two main operating modes:
• DT6: Each channel can be controlled via its own DALI address (3 addresses total).
• Colour&Dim: Uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• SwitchDim2: Provides control via 2 switch inputs for light level and color without DALI.
• The dimmer supports a range of 0.1% to 100% dimming and features adjustable PWM frequencies (122Hz, 244Hz, 488Hz, 976Hz; with firmware version 4.6 and later, frequencies are 250Hz, 500Hz, 1kHz).
• It is compact for integration in luminaires and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with maximum input currents of 4A, 8A, 10A, or 16A, which can be distributed among the channels (max 10A per channel).

Overview

• The 3-channel DALI LED Dimmer is designed for constant voltage LED modules operating between 12V and 48V. It offers two main operating modes:
• DT6: Each channel can be controlled via its own DALI address (3 addresses total).
• Colour&Dim: Uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• SwitchDim2: Provides control via 2 switch inputs for light level and color without DALI.
• The dimmer supports a range of 0.1% to 100% dimming and features adjustable PWM frequencies (122Hz, 244Hz, 488Hz, 976Hz; with firmware version 4.6 and later, frequencies are 250Hz, 500Hz, 1kHz).
• It is compact for integration in luminaires and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with maximum input currents of 4A, 8A, 10A, or 16A, which can be distributed among the channels (max 10A per channel).

Overview

• The 1-channel DALI LED Dimmer is designed for constant voltage LED modules with operating voltages from 12V to 48V.
• It supports Sw&Dim and SwitchDim2 modes, allowing light level control through 1 or 2 switch inputs without DALI.
• From firmware version 4.0 onward, the device can also be controlled directly by a motion sensor, enabling the "corridor function."
• The dimmer is compact, suitable for integration into luminaires or remote ceiling installations.  
• It supports maximum input currents of 4A, 8A, 10A, or 16A, depending on the type.
• The dimmer features low standby power consumption, high efficiency, and is configured via PC software DALICockpit and a DALI USB interface.
• It also comes with user-friendly factory default settings.

Overview

• The 1-channel DALI LED Dimmer is designed for constant voltage LED modules with operating voltages from 12V to 48V.
• It supports Sw&Dim and SwitchDim2 modes, allowing light level control through 1 or 2 switch inputs without DALI.
• From firmware version 4.0 onward, the device can also be controlled directly by a motion sensor, enabling the "corridor function."
• The dimmer is compact, suitable for integration into luminaires or remote ceiling installations.  
• It supports maximum input currents of 4A, 8A, 10A, or 16A, depending on the type.
• The dimmer features low standby power consumption, high efficiency, and is configured via PC software DALICockpit and a DALI USB interface.
• It also comes with user-friendly factory default settings.

Overview

• The DALI dimmer is designed for dimming 230V LED retrofit bulbs via DALI (Device Type 4 from firmware 3.0 onward).
• It is available in various types to support different loads: 3W to 25W (PD) for back box installation and 10W to 300W (PD300) for remote ceiling and DIN rail installations.
• The dimmer supports trailing edge phase cut for resistive and capacitive loads, leading edge phase cut for resistive and inductive loads, and is also available as a universal dimmer.
• It converts the DALI dim level into a phase cut controlled voltage, either trailing or leading edge.
• The minimum dim level can be set via DALI (MIN LEVEL), and an additional operating mode as a switch (DT7 compliant) is available from firmware 3.5 onward.
• The module functions as a DALI-line client, possessing its own DALI address.
• It also features double DALI terminals, allowing the DALI signal line to be connected through.