MDT

The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.

It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.

The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.

The temperature measuring range is between -10 and 50 °C.

The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.

It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.

The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.

The temperature measuring range is between -10 and 50 °C.

The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.

It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.

The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.

The temperature measuring range is between -10 and 50 °C.

The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.

Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.

The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.

Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.

In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.

The MDT Room Temperature / Humidity Sensor 55 detects temperature and humidity in indoor rooms; the dew point is calculated automatically.

Min / max limit values can be set for the sensors during the parameterisation of the device and corresponding actions can be defined in case of deviation.

The comfort range of the room climate is defined using Min / Max values when parameterising the room temperature / humidity sensor.

The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line.

This significantly increases the safety of the protected line in the inner and in the outdoor area.

A manipulation of the device programming is no longer possible.

The MDT Shutter Push-button Smart 55 with colour display for function and status notifications was specifically developed with blind and shutter control in mind.

The shading status can be seen at a glance; messages such as “wind alarm” are immediately visible on the display.

The integrated daily, weekly and astronomical timer reliably assumes daily repetitive tasks and can provide other bus participants with the time and date.

The MDT Temperature Controller is used for all purpose temperature control applications.

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Time Switch with 20 channels (8 cycle times for each channel) has a daily- / weekly- / astro switching function and an adequate power reserve if the bus voltage fails.

The cycle times of the single channels are adjustable by the ETS or can be set directly at the device.

The large active color display for comfortable handling allows direct switching of the 20 channels (manual mode).

Twilight sensor / temperature sensor KNX for detection and evaluation of outdoor brightness and outdoor temperature with integrated bus coupler.

The MDT Universal Interface BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for a wide range of applications.

Versions for floating contacts and 230 V AC are available.

The MDT Universal Interface BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for a wide range of applications.

Versions for floating contacts and 230 V AC are available.

The USB Interface enables the communication between the PC and the KNX / EIB system.

The USB interface is galvanically isolated from the KNX / EIB bus.

The MDT Weather station Home is made for the weather detection for private use.

The installation is made in the outdoor area and should be made on a pole.

Alternative, the weather station can be installed on a wall at the southern side.

The connection to the bus is made via a 5 m long bus cable, which is included in the delivery contents.

MDT Frame 1 gang for assortment 55, IT/US, Black matt.

Design frame 1 gang, incl.

Installation frame type E international, for the assortment 55.

MDT Frame 1 gang for assortment 55, IT/US, White glossy finish.

Design frame 1 gang, incl.

Installation frame type E international, for the assortment 55.