MDT
The MDT Push-button Smart 55 has a central colour display and mechanical push-buttons.
The buttons can be used individually or grouped (horizontally or vertically).
In addition to the status indication in the display, each button has its own RGB status LED.
The RGBW status LEDs can be controlled using internal or external objects.
The MDT Push-button Smart 55 has a central colour display and mechanical push-buttons.
The buttons can be used individually or grouped (horizontally or vertically).
In addition to the status indication in the display, each button has its own RGB status LED.
The RGBW status LEDs can be controlled using internal or external objects.
The MDT Push-button Smart 55 has a central colour display and mechanical push-buttons.
The buttons can be used individually or grouped (horizontally or vertically).
In addition to the status indication in the display, each button has its own RGB status LED.
The RGBW status LEDs can be controlled using internal or external objects.
The MDT Push-button Smart 55 has a central colour display and mechanical push-buttons.
The buttons can be used individually or grouped (horizontally or vertically).
In addition to the status indication in the display, each button has its own RGB status LED.
The RGBW status LEDs can be controlled using internal or external objects.
The Push-button Smart 86 has six mechanical buttons with finger recesses.
The push-button can be used to map up to 12 functions plus the “slap function”.
The buttons are labelled individually using symbols and texts on the large active colour display.
The status of the respective function can be detected both on the display and via the RGB display of the buttons.
The Push-button Smart 86 has six mechanical buttons with finger recesses.
The push-button can be used to map up to 12 functions plus the “slap function”.
The buttons are labelled individually using symbols and texts on the large active colour display.
The status of the respective function can be detected both on the display and via the RGB display of the buttons.
The display dynamically adjusts to the surrounding brightness and can be automatically switched off at night.
The Push-button Smart 86 has six mechanical buttons with finger recesses.
The push-button can be used to map up to 12 functions plus the “slap function”.
The buttons are labelled individually using symbols and texts on the large active colour display.
The status of the respective function can be detected both on the display and via the RGB display of the buttons.
The Push-button Smart 86 has six mechanical buttons with finger recesses.
The push-button can be used to map up to 12 functions plus the “slap function”.
The buttons are labelled individually using symbols and texts on the large active colour display.
The status of the respective function can be detected both on the display and via the RGB display of the buttons.
The Rain Sensor SCN‐RS1R1.01 is used for the detection of rain and send messages if rain was detected. For faster drying after rain and at low temperatures, a heating is integrated below the sensor area.
This enables also the detection of two contiguous rain periods.
The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.
It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.
The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.
It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.
The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.
