Aidoo KNX Hisense VRF

Set the operating temperature using the Hisense thermostat probe measurement.

Access the function selection and set value 1 in parameter C8 (refer to the installation manual).

Disconnect the indoor unit and follow the assembly steps:Screw attachment or double-sided adhesive attachment.

Connect the Aidoo to the KNX bus and the indoor unit terminals using the supplied cable.

Power the indoor unit and check the LED indicators (refer to the self-diagnosis section).

Configure the device in ETS using the provided database.

(Optional) Configuration to impose temperature:

An external device with a temperature probe (e.g., KNX thermostat) is required.

Autonomous mode: Aidoo operates as the master and can impose the room temperature from the external probe without specific configuration.

Master-slave mode: The unit’s thermostat must be configured as a slave (parameter F2 set to “Sub”).

This summary highlights the key points for installing and configuring the device.