Gateways
Both KNX SERVER and KNX SUPERIO will show the functions of your system in a stylish and intuitive way: through the OPTIMA interface.
Thanks to the integrated web support, the interface can be shown on all kind of devices with a compatible browser and will automatically adapt its contents to the different conditions (resolution, size …).
The use of the interface has been optimized for devices with touchscreen and – in addition to controling of the KNX system – offers a huge amount of additional functionalities.
Get an idea of how your visualization with DIVUS OPTIMA might look like.
Simply click on the following link to be redirected to our demo server:
URL: https://optima.divus.eu
username: user
password: user
With KNX IP interface, bus powered.
Application area
The KNX Modbus TCP Gateway 716 secure is a compact gateway between KNX TP and modbus TCP with 250 freely configurable datapoints.
The device enables easy integration of modbus devices that support the TCP protocol via IP and can act as a modbus master or slave.
As master the device can address up to 5 slave devices.
The assignment between KNX objects and modbus registers can be configured via parameters in the ETS
without an additional tool.
Two buttons and three LEDs allow local operation and visualization of the device status.
Furthermore, the device can be used as a programming interface to connect one or more PCs to the KNX bus (e.g. for ETS®).
Power is supplied via the KNX bus.
The device supports KNX Security.
KNX Modbus Gateway with 250 data points.
Application area
The KNX Modbus RTU Gateway 886 is a compact Gateway between KNX TP and Modbus RTU with 250
freely configurable channels.
The device enables easy integration of Modbus devices that support the RTU protocol via RS-485 and can act as a Modbus master or slave.
As Master the device can address up to 25 slave devices.
The assignment between KNX objects and Modbus registers can be configured via parameters in the ETS
without an additional tool.
The gateway provides a galvanic isolation between KNX bus and Modbus.
Two buttons and three LEDs allow local operation and visualization of the device status.
Interface and ObjectServer between LAN and KNX Bus.
Application area
The KNX IP BAOS 777 integrates a web server for the KNX installation.
This allows the visualization in a web browser on a PC or mobile device.
The email function allows the notification e.g. in case of an alarm.
The integration of a Date & Time Server (NTP) allows to obtain date and time automatically via the Internet
and to synchronize the KNX installation.
Extensive time functions offer a powerful KNX time switch with week function.
The configuration is done with the ETS software.
Gateway between KNX DMX512.
Application area
The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 (protocol for lighting control) with up to 64 freely configurable channels.
In master mode, the device allows convenient control of DMX luminaires, for example with KNX push-buttons.
Up to 64 dimming channels or up to 8 RGB/RGBW channels are available.
Several subsets of DMX512 addresses can be assigned to each channel.
The dimming channels enable dimming of one or more DMX devices via KNX.
In addition, 4 sequencers are available in the gateway to carry out more complex tasks.
In slave mode KNX actuators can be controlled by DMX.
For example, the room lighting, which is part of the KNX installation, can be controlled via a DMX lighting control panel.
