Drivers and ECGs
25%
- Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
- Bidirectional data communication for DALI bus monitoring, configuration and control.
- Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
- USB and DALI-line are galvanically isolated.
- Supply via DALI-line and USB interface
- Various types available: Standard Mini, with integrated 30mA bus power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory Wireless.
- 2 sets of DALI terminals for easy connection - signal line can be looped through
23%
Communication interface between PC and modules on a DALI Bus.
- The DALI-2 USB is recognized as hardware interface / serial port interface. Windows 10 and higher includes automatic drivers for recognizing the device. Drivers for windows 7 and lower are available on request.
- After installation the device can be found in the Windows Device Manager section “Ports (COM)”
- The DALI-2 USB supports the transmission and monitoring of Standard DALI commands as well as several proprietary protocol extensions.
More info: https://www.lunatone.com/wp-content/uploads/2023/01/24138215_DALI-2_USB30mA_EN_D0114.pdf
25%
Overview
- DALI bus power supply unit.
- Guaranteed supply current 100mA.
- Maximum supply current 130mA.
- Suitable to power a DALI-line with up to 50 standard DALI ballasts.
- Suitable for back box installation and integration in protection class II devices.
- Power supply range 24Vdc … 48Vdc.
25%
- Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
- Bidirectional data communication for DALI bus monitoring, configuration and control.
- Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
- USB and DALI-line are galvanically isolated.
- Supply via DALI-line and USB interface
- Various types available: Standart, mini, with integrated 30mA bus, power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory, wireless
- 2 sets of DALI terminals for easy connection - signal line can be looped through
25%
Overview
- Module with a serial interface to communicate with components in a DALI-line via RS232
- A simple way to connect a PC or PLC to a DALI network.
- Bidirectional data transfer
- Addressing, configuration, status requests and monitoring
- Collision detection
- Support for several proprietary DALIprotocol extensions.
- Electrical isolation
- No external power supply necessary; the device is supplied via the DALI bus and the serial interface.
- Double DALI-terminals
- New version with LUBA Protocol: Art Nr.: 24166096-LU-HS
- Version with integrated 240mA bus power supply: see datasheet for RS232-PS (Article Nr.:24166096-PS)
25%
25%
Overview
- Small interface module for the conversion of 0-10V control signals to DALI dim levels
- Devices with 1, 2 and 3 channels available
- The 0-10V voltage is transformed to a a DALI dim level and DALI-command Off and sent to the defined effective range on the DALI line
- A change on the 0-10V input voltage (<1%) is used as event trigger
- Supply voltage 12V to 24V DC (e.g. 24V/300mA Art.Nr. 24166012-24HS), multiple devices can be supplied by the same supply voltage
- Configuration of effective range and conversion characteristic (conversion curve and behaviour below 1V input voltage) via DALI-Cockpit and DALIUSB-interface
25%
Overview
- DALI bus power supply unit
- Guaranteed Supply Current 220mA
- Maximum Supply Current 250mA
- Suitable to power an entire DALI-line with 64 standard DALI ballasts
- Suitable for DIN rail mounting
- Power supply range 120Vac … 240Vac for worldwide use
- Surge immunity up to 400V
- Load indicator
- Integrated test button for function check
- System status queries (DALI current, bus load, runtime etc.) with DALICockpit Software
25%
Overview
- DALI bus power supply unit
- Guaranteed Supply Current 200mA
- Maximum Supply Current 250mA
- Suitable to power an entire DALI-line with 64 standard DALI ballasts
- Independent electronic device for remote ceiling and integration in protection class II devices
- Power supply range 110Vac … 240Vac for worldwide use
- Surge immunity up to 400V
25%
Overview
- DALI bus power supply unit
- Guaranteed Supply Current 128mA
- Maximum Supply Current 250mA
- Suitable to power an entire DALI-line with 64 standard DALI ballasts
- Independent electronic device for remote ceiling and integration in protection class II devices
power supply range 110Vac … 240Vac for worldwide use - Surge immunity up to 400V
25%
Overview
- DALI bus power supply unit
- Guaranteed Supply Current 30mA for Version 24033444-30, and. 80mA for Version 24033444-80
- Maximum supply current allowed on a DALI line in total: 250mA
- Version 24033444-30 is suitable to power a DALI-line with up to 15 standard DALI ballasts
- Version 24033444-80 is suitable to power a DALI-line with up to 40 standard DALI ballasts
- Suitable for back box installation and integration in protection class II devices
- Power supply range 110Vac … 240Vac for worldwide use
- Surge immunity up to 400V
25%
Overview
- DALI bus power supply unit
- Guaranteed Supply Current 30mA for Version 24033444-30, and. 80mA for Version 24033444-80
- Maximum supply current allowed on a DALI line in total: 250mA
- Version 24033444-30 is suitable to power a DALI-line with up to 15 standard DALI ballasts
- Version 24033444-80 is suitable to power a DALI-line with up to 40 standard DALI ballasts
- Suitable for back box installation and integration in protection class II devices
- Power supply range 110Vac … 240Vac for worldwide use
- Surge immunity up to 400V
25%
Overview
- Device for DALI-line expansion
- Control of several DALI-devices via 3 DALI-addresses
- 3 DALI outputs (DALI A,B,C) with integrated DALI power supply (50mA each) for powering control gear and control devices
- For the superordinate DALI circuit the DALI expander acts like 3 separate DALI control gear – 3 DALI addresses, one for each subnet (A, B, C)
- Forwarding commands received at the input (DALI IN) to the corresponding output (DALI A, B, C) broadcast
- Alternative control options of the DALI-output circuits via Switch&Diminputs (Broadcast).
- Group commands are passed from one to the other output circuits (cross function)
- Galvanic isolation between DALI-input and DALI-outputs
- Independent control gear for remote ceiling an integration in luminaires
25%
Overview
• Device for simple DALI line expansion.
• Control of several DALI-devices via one DALI-address.
• For the superordinate DALI line the DALI Expander acts as a DALI EVG (DALI IN) with a single address.
• Output (DALI OUT) with DALI power supply (200mA) for the supply of DALI EVG's and DALI control modules.
• Forwarding commands received at the input (DALI IN) to the output (DALI OUT) broadcast.
• Alternative control options of the DALI-output line via Switch&Dim-input (Broadcast).
25%
Overview
- Device for DALI-line expansion
- Control of several DALI-devices via 3 DALI-addresses
- 3 DALI outputs (DALI A,B,C) with integrated DALI power supply (50mA each) for powering control gear and control devices
- For the superordinate DALI circuit the DALI expander acts like 3 separate DALI control gear – 3 DALI addresses, one for each subnet (A, B, C)
- Forwarding commands received at the input (DALI IN) to the corresponding output (DALI A, B, C) broadcast
- Alternative control options of the DALI-output circuits via Switch&Diminputs (Broadcast).
- Group commands are passed from one to the other output circuits (cross function)
25%
Overview
- Device to enhance the maximum DALI cable length from 300m up to 600m.
- Enhancement and Transmission of the DALI-signals (bidirectional).
- Galvanic separation between DALIcircuits.
- Either radially arranged network layout or cascaded system mounting operated with single master.
- Cascading (Series wiring) of up to 3 repeaters
- The maximum amount of DALI-devices in the total network is limited to 64, the devices can be divided on the subcircuits freely.
- For each subordinate DALI circuit, a separate bus power supply is needed. (DALI PS)
- Type with integrated power supply available
- Repeater PS: Test button for simple function check of all DALI bus ballasts.
- Repeater PS: Module for DIN rail mounting and for remote ceiling installation available.
25%
Overview
- Device to enhance the maximum DALI cable length from 300m up to 600m.
- Enhancement and Transmission of the DALI-signals (bidirectional).
- Galvanic separation between DALIcircuits.
- Either radially arranged network layout or cascaded system mounting operated with single master.
- Cascading (Series wiring) of up to 3 repeaters
- The maximum amount of DALI-devices in the total network is limited to 64, the devices can be divided on the subcircuits freely.
- For each subordinate DALI circuit, a separate bus power supply is needed. (DALI PS)
- Type with integrated power supply available
- Repeater PS: Test button for simple function check of all DALI bus ballasts.
- Repeater PS: Module for DIN rail mounting and for remote ceiling installation available.
25%
Overview
- Independent light control of up to 256 DALI ballasts on 4 DALI-lines
- Configuration via Ethernet and PCsoftware tool DALI Cockpit.
- Modbus TCP access (control & visualisation).
- With the DALI4Net control devices (input devices and sensors) and control devices on each DALI-line can be configured (Ethernet/DALI Interface).
- Addressing, configuration, status queries, monitoring.
- Collision detection.
- DIN rail mounting.
- 24V power supply (e.g. 24V/300mA Art.Nr. 24166012-24HS).
- Basic version and standard version with additional central functions available.
25%
Overview
- Independent light control of up to 256 DALI ballasts on 4 DALI-lines
- Configuration via Ethernet and PCsoftware tool DALI Cockpit
- Modbus TCP access (control & visualisation)
- With the DALI4Net control devices (input devices and sensors) and control devices on each DALI-line can be configured (Ethernet/DALI Interface)
- Addressing, configuration, status queries, monitoring
- Collision detection
- DIN rail mounting
- 24V power supply (e.g. 24V/300mA Art.Nr. 24166012-24HS)
- Basic version and standard version with additional central functions available
25%
Overview
- Communication interface between DALIsystems and the configuration software tool: DALI Cockpit.
- Bidirectional data communication for DALI bus monitoring, configuration and control.
- Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
- USB and DALI-line are galvanically isolated.
- Supply via DALI-line and USB interface
- Various types available: standard, mini, with integrated 30mA bus power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory, wireless
- 2 sets of DALI terminals for easy connection - signal line can be looped through
