Binary/Analog Inputs

Blind/Shutter control with one output of a KNX Multi IO.

• The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.

Bi-stable coupling relay for KNX Multi IO.

Application area

The Multi IO Extension Switch 590 serves as a power-saving alternative to commercial standard coupling relays.

The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.

The Multi IO Extension Switch 590 has an integrated fuse to protect high-quality equipment.

Push button for extra low voltage for MATCH 55 series.

The 24V Push Button 436 is a push button for direct connection to push button inputs of e.g. smart home control panels, PLC controls or push button interfaces of any bus system.

The device is available with one or two rockers.

Each rocker offers two pressure points (up/down).

A pluggable connection cable is included in the scope of delivery.

The device is part of the MATCH 55 push button series.

With the supplied installation kit, the push button fits mechanically to numerous switch ranges available on the market with internal dimensions of 55 mm.

The push button is characterized by soft and quiet button press.

The optional terminal block enables the screwless connection of cables with a cross section of up to 0.75 mm².

KNX TP Push Button Interface with KNX Data Security.

Application area

The KNX TP Push Button Interface 420 secure is a push button interface for the KNX bus.

It is suitable as a binary input for connecting up to four conventional push buttons or potential-free contacts. 

In addition, the device offers two outputs for LEDs. 

A pluggable connection cable is included in the scope of delivery.

The integrated push buttons and LEDs allow a quick test of the configuration.

The application offers extensive functions for switching, dimming, shutter, valuator, scene and color control as well as sequence controllers and scalable pulse counters.

Each channel can be configured individually.

The flexible operating concept also allows different functions on one channel depending on the setting.

In addition, the device contains 10 independent logic or time functions.

The device supports KNX Data Security.

KNX IP Multi IO with 48 configurable In- and Outputs.

Application area

The KNX IP Multi IO 580 is a universal binary interface for building control.

It provides 48 I/O lines.

Each line can be used as binary input as well as binary output.

The peripherals can be fed by an external voltage of 24 V⎓.

Channels which are configured as inputs can be used to control lights or blinds via the KNX network. 

They also can be used to count impulses, e.g. as interface for energy meters. 

Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.

590) or jalousie relays (592).

The device works using the medium KNX IP.

It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects.

Also the KNX addressing scheme, based on individual device

address and group objects, is unchanged.

An easy to read OLED display on the front panel enables a manual operation to test the installation.

KNX TP Multi IO with 48 configurable In- and Outputs.

Application area

The KNX TP Multi IO 570 is a universal binary interface for building control. 

It provides 48 I/O lines.

Each line can be used as binary input as well as binary output.

The peripherals can be fed by an external voltage of 24 V⎓.

Channels which are configured as inputs can be used to control lights or blinds via the KNX network.

They also can be used to count impulses, e.g. as interface for energy meters. 

Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.590) or jalousie relays (592).

The integrated USB interface allows establishing a bidirectional connection between a PC and the KNX bus.

The USB connector has a galvanic separation from the KNX bus.

Both ETS (Version 4.2 or later) and visualization tools support this interface.

The configuration of the device is done with ETS, a local download is possible.

An easy to read OLED display on the front panel enables a manual operation to test the installation.

Universal dimming actuator and binary inputs with 1 230V dimming output for lights and 2 binary inputs.

Application area

The KNX IO 530 (1D2I) is a compact 230 V dimmer with 1 dimming output and 2 binary inputs.

The dimming actuator can be used for dimmable electric lights supplied with 230 V mains.

To cover a wide range of usable electric lights the KNX IO 530 can operate with trailing or leading edge dimming.

Besides controlling the light by switching, rel.

Dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function, staircase light and sequencer.

Blind actuator with 2 binary inputs.

Application area

The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs.

The actuator is used to control a blind, a shutter or a window drive.

The relay contacts are electrically interlocked.

The inputs can be connected to conventional switches with an external voltage of 12 to 230 V.

In the not configured state the binary inputs control the actuator channel.

Via commissioning the device using ETS® software the binary inputs can be used independently.

Two push buttons and three LEDs allow a local operation and a visualization of the device state.

In addition to the output and input channels the device includes 16 independent functions for logic or timer control.

Switching actuator with 1 output and 2 binary inputs.

Application area

The KNX IO 511.1 secure (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs.

The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).

The inputs can be connected to conventional switches with an external voltage of 12 to 230 V.

In ex-factory settings the inputs are connected internally to the actuator.

The actuator combined with input B1 serves as a latching relay.

Input B2 is used for zero crossing detection.

Binary input with 4 channels to control lights, shutter etc. Inputs suitable for dry contacts.

Application area

The KNX IO 411 (4Ii) is a compact binary input with 4 channels to control lights, shutter etc.

With conventional switches or contacts.

Inputs are designed for dry contacts.

Using as impulse counter is possible as well.

It can be used to connect energy meters with S0 output or anemometers.

Two push buttons and three LEDs allow a local operation and a visualization of the device state.

In addition to the input channels the device includes 16 independent functions for logic or timer control.

Binary input with 4 channels to control lights, shutter etc.

Installation Instructions

• The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.