Products

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Temperature Sensor PT1000 ceiling installation.

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

MDT Temperature Sensor PT1000 strap on installation.

Temperature sensor PT1000 strap on installation, cable length 3 m.

Dimensions: 15 x 22 mm.

Blind/Shutter control with one output of a KNX Multi IO.

• The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.

Bi-stable coupling relay for KNX Multi IO.

Application area

The Multi IO Extension Switch 590 serves as a power-saving alternative to commercial standard coupling relays.

The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.

The Multi IO Extension Switch 590 has an integrated fuse to protect high-quality equipment.

• The power supply of the electronics occurs via the connection to the primary line. This makes possible to detect and report a bus voltage failure at the secondary line.
• Used as a line coupler, it joins up the lines with the main line to create a function zone; as a backbone coupler, it joins up the function zones with the overriding backbone line.
• Both types of couplers link primary lines and secondary lines as governed by their filtering tables to only pass on group telegrams if their destination address is recorded in the filtering table.
• Used as a repeater the device enables the connection of more than 64 bus devices to one bus line.
• Up to three repeaters can be connected to one bus line (as shown in figure 1) thus enabling the connection of a total of 252 bus devices (additionally to the three repeaters) to one bus line.

• KNX/BACnet Gateway: Bridges communication between KNX and BACnet networks.
• 250 Communication Objects: Converts KNX group addresses into BACnet objects automatically.
• COV Subscriptions: Supports up to 455 real-time value subscriptions for efficient monitoring.
• Integrated Web Server: Offers a user-friendly interface for configuration and monitoring.
• Remote Parameterization: Includes a KNXnet/IP interface for remote access via ETS.
• Security Options: Features password protection and VPN support for secure network access.
• Flexible Power Supply: Operates with external SELV AC/DC 24V.
• DIN Rail Compatible: Easy to install on DIN rails for a compact setup.

The IP router has the following attributes:

• Easy to connect to higher-level systems by using the internet protocol (IP)
• Secure access and data transfer via KNXnet/IP Secure
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Fast communication between KNX lines, areas and systems (KNXnet/IP routing)
• Communication across buildings and properties (networking properties)
• Filtering and forwarding of telegrams according to: Physical address, Group address
• LED displays for Operational readiness, KNX communication, IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)

IP Interface Secure has the following attributes:

•  Easy to connect to higher-level systems by using the internet protocol (IP)
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Up to five KNXnet/IP tunneling connections are possible at the same time
• LED displays for operational readiness, KNX communication and IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)