Products

• Output for switching and dimming resistive, inductive or capacitive loads
• Automatic adjustment to leading edge or trailing edge control, depending on the type of load
• Rated frequency 50...60 Hz
• Electronic protection of the output against overload, short circuit and temperature rise
• Bus-powered electronics
• Integrated bus coupling unit, Bus connection via bus terminal block
• Type of protection: IP 20
• Rated operational voltage AC 120 V

• Protruding wires stranded AWG 12
• A phase connection for an output that is equipped with a relay contact per output as a switching element
• Contact rated operational voltage AC 120 V, AC 230 V, AC 277 V, AC 347 V
• Contact rated operational voltage AC/DC 24 V
• Contact rated current according to DIN EN 60669-1: 16 A / 20 A (resistive load)
• Fluorescent lamp load according to DIN EN 60669-1: 16 AX / 20 AX (200 µF) at AC 230 V
• Bus-powered electronics
• Integrated bus coupling unit
• Bus connection via bus terminal

• The device can be configured with Desigo Room Automation commissioning tool (ABT) or with KNX Engineering Tool Software (ETS).
• Protruding wires stranded AWG 12
• A phase connection for an output that is equipped with a relay contact per output as a switching element
• Contact rated operational voltage AC120 V, AC 230 V, AC 277 V, AC 347 V
• Contact rated operational voltage AC / DC 24 V
• Contact rated current according to DIN EN 60669-1: 16 A / 20 A (resistive load)
• Fluorescent lamp load according to DIN EN 60669-1: 16 AX / 20 AX (200 µF) at AC 230 V
• Bus-powered electronics
• Integrated bus coupling unit
• Bus connection via bus terminal
• Red LED for display of the activation of the addressing mode as well as the operational readiness

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

KNX Module for Raspberry Pi.

Application area

The KNX BAOS Module 838 kBerry is an extension board for the Raspberry PI® single-board computer.

It can be plugged directly on the Raspberry board and serves as a serial interface to KNX.

BAOS stands for “Bus Access and Object Server”.

So the module allows the access to the KNX bus on telegram level (KNX Link Layer) as well as on data point level (KNX Application Layer).

The connection between application and KNX BAOS Module is established via a UART connection (FT1.2 framing).

For a quick start a generic ETS® entry with 1000 group objects is available.

Individual ETS entries can be created as well.

The KNX BAOS Module 838 is powered via the bus and provides galvanic isolation.

The firmware of the KNX BAOS Module 838 is fully compatible with the KNX BAOS Module 830.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

• 4 fold inputs. Can be individually configured per input
• 4 fold LED. Can be individually configured per LED
• LED output current: max. 2.5mA, limited via series resistor of 2K Ohm
• Input/Output wires: 2*5-pin wires, approx. 30cm. long. Can be extended up to 10 meters maximum
• Size: 1.81 x 1.81 x 0.46 inches. Fits in a 1-gang US wall box

The Brightness Sensor / -Controller with constant level light intensity is suited for ceiling installation in 35 mm Kaiser installation box.

Black / red

For solid core cables 0.6 - 0.8 mm²

Packaging unit: 50 pieces

• Conductor: Polished copper, 0.0315 inches (0.80 mm).
• Operating Voltage: 250V A.C / 300V D.C.
• Compliance: CPR-certified, low smoke, halogen-free, flame-resistant.
• Applications: KNX/EIB home automation (lighting, blinds, HVAC).
• Sizes: 1-pair and 2-pair options; ~0.2–0.26 inches diameter, 22–40 lbs/1000 ft.
• Note: This is a non-UL listed cable.

KNX cable, 20 AWG two conductor Shielded, Orange/Green plenum rated PVC jacket.

Suitable application: KNX installations, Sound, Audio, Security and Data communication.

2 wires for data and power, suitable for KNX installations.

KNX cable, 20 AWG two conductor Shielded, Orange/Green plenum rated PVC jacket.

Suitable application: KNX installations, Sound, Audio, Security and Data communication.

2 wires for data and power, suitable for KNX installations.

Total up to 32 KNX channels and 32 CASAMBI scenes can be registered in the gateway, which to implement:

• Unidirectional KNX -> CASAMBI, up to 16
• Unidirectional CASAMBI -> KNX, up to 16  
• Bidirectional CASAMBI <-> KNX, up to 16
• It also can control scene on/off and dimming in KNX -> CASAMBI direction.