Products

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Temperature Sensor PT1000 ceiling installation.

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Temperature Controller is used for all purpose temperature control applications.

The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

MDT Temperature Sensor PT1000 strap on installation.

Temperature sensor PT1000 strap on installation, cable length 3 m.

Dimensions: 15 x 22 mm.

Blind/Shutter control with one output of a KNX Multi IO.

• The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.

Bi-stable coupling relay for KNX Multi IO.

Application area

The Multi IO Extension Switch 590 serves as a power-saving alternative to commercial standard coupling relays.

The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.

The Multi IO Extension Switch 590 has an integrated fuse to protect high-quality equipment.

• The power supply of the electronics occurs via the connection to the primary line. This makes possible to detect and report a bus voltage failure at the secondary line.
• Used as a line coupler, it joins up the lines with the main line to create a function zone; as a backbone coupler, it joins up the function zones with the overriding backbone line.
• Both types of couplers link primary lines and secondary lines as governed by their filtering tables to only pass on group telegrams if their destination address is recorded in the filtering table.
• Used as a repeater the device enables the connection of more than 64 bus devices to one bus line.
• Up to three repeaters can be connected to one bus line (as shown in figure 1) thus enabling the connection of a total of 252 bus devices (additionally to the three repeaters) to one bus line.

• KNX/BACnet Gateway: Bridges communication between KNX and BACnet networks.
• 250 Communication Objects: Converts KNX group addresses into BACnet objects automatically.
• COV Subscriptions: Supports up to 455 real-time value subscriptions for efficient monitoring.
• Integrated Web Server: Offers a user-friendly interface for configuration and monitoring.
• Remote Parameterization: Includes a KNXnet/IP interface for remote access via ETS.
• Security Options: Features password protection and VPN support for secure network access.
• Flexible Power Supply: Operates with external SELV AC/DC 24V.
• DIN Rail Compatible: Easy to install on DIN rails for a compact setup.

The IP router has the following attributes:

• Easy to connect to higher-level systems by using the internet protocol (IP)
• Secure access and data transfer via KNXnet/IP Secure
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Fast communication between KNX lines, areas and systems (KNXnet/IP routing)
• Communication across buildings and properties (networking properties)
• Filtering and forwarding of telegrams according to: Physical address, Group address
• LED displays for Operational readiness, KNX communication, IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)

IP Interface Secure has the following attributes:

•  Easy to connect to higher-level systems by using the internet protocol (IP)
• Direct access to the KNX installation from every point in the IP network (KNXnet/IP tunneling)
• Up to five KNXnet/IP tunneling connections are possible at the same time
• LED displays for operational readiness, KNX communication and IP communication
• Easy and secure configuration using ETS
• Easy to connect to visualization systems and facility management systems
• Slot for SD card (not in use)

• Secure KNX/IP Gateway: Enables communication between KNX systems and IP networks with KNX IP Secure encryption.
• Power Over Ethernet (PoE): Can be powered via PoE or an external 24V AC/DC supply.
• Remote Access: Provides secure remote access to KNX systems through VPN connections.
• Multiple Connections: Supports up to five simultaneous KNXnet/IP tunneling connections.
• LED Indicators: Features LEDs for KNX, IP communication, and power status.
• Easy Configuration: Configured through ETS software, supporting secure commissioning.
• Compact Design: Designed for DIN rail mounting, ideal for distribution boards.
• Flexible Power Options: Operates via PoE or separate power supply, ensuring flexibility in installation.

• Direct Mode Pushbutton: The button with an integrated yellow LED toggles between bus mode and direct mode.
• Brief Press Functionality: Pressing the button briefly activates the green LED for 30 seconds, indicating the last selected module (A to E) and the switching state of the outputs (red LEDs on buttons 1 to 3).
• Switching State Indication: The red LEDs in buttons 1 to 3 show the relay contact status: LED ON = contact closed, LED OFF = contact open.
• Activating Direct Mode: Holding the button for at least 3 seconds turns on the yellow LED, indicating that direct mode is now active.
• Output Control in Direct Mode: In direct mode, each output of the currently selected module can be switched on or off via a pushbutton on the top of the main module, using a toggle function.
• Pushbutton Behavior: Pressing the pushbutton once turns the output on if it's off, and pressing it again turns it off. The red LED on the pushbutton shows the current state.
• Unused Buttons: Pushbuttons 4 to 6 and their LEDs are not utilized in the N 513/11 model.
• Module Selection: To change the output state of a different module, the desired module must be selected by pressing the direct mode pushbutton multiple times.

• Device Type: The switching actuator sub-module N 513/21 is a DIN-rail mounted device in N-system dimensions.
• Relay Outputs: It can switch three groups of electrical consumers independently via its three relay contact outputs.
• Load Monitoring: Each relay output features load current measurement and monitoring (load-check).
• Standalone Operation: The sub-module cannot operate independently and must be connected to a main module.
• Connection Method: It connects via a 6-pole bridging connector to a main module (N 513/11, N 512/11, or N 562/11) or to another sub-module already connected to a main module.
• Power Supply: The sub-module’s electronics are powered by bus voltage through the 6-pole bridging connector.
• Modular Extension: Up to 4 sub-modules can be connected in series to a main module, extending it from 3-fold to 15-fold switching capability.