Products

The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.

Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.

The room brightness is measured by the integrated light sensor and made available as an object.

The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.

Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.

The room brightness is measured by the integrated light sensor and made available as an object.

The version with temperature sensor and two sensor buttons (SCN-BWM55T.x2) is an all-rounder if you have many corridors and rooms.

The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.

Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.

The room brightness is measured by the integrated light sensor and made available as an object.

The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.

Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.

The room brightness is measured by the integrated light sensor and made available as an object.

KNX TP Multi IO with 48 configurable In- and Outputs.

Application area

The KNX TP Multi IO 570 is a universal binary interface for building control. 

It provides 48 I/O lines.

Each line can be used as binary input as well as binary output.

The peripherals can be fed by an external voltage of 24 V⎓.

Channels which are configured as inputs can be used to control lights or blinds via the KNX network.

They also can be used to count impulses, e.g. as interface for energy meters. 

Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.590) or jalousie relays (592).

The integrated USB interface allows establishing a bidirectional connection between a PC and the KNX bus.

The USB connector has a galvanic separation from the KNX bus.

Both ETS (Version 4.2 or later) and visualization tools support this interface.

The configuration of the device is done with ETS, a local download is possible.

An easy to read OLED display on the front panel enables a manual operation to test the installation.

KNX IP Multi IO with 48 configurable In- and Outputs.

Application area

The KNX IP Multi IO 580 is a universal binary interface for building control.

It provides 48 I/O lines.

Each line can be used as binary input as well as binary output.

The peripherals can be fed by an external voltage of 24 V⎓.

Channels which are configured as inputs can be used to control lights or blinds via the KNX network. 

They also can be used to count impulses, e.g. as interface for energy meters. 

Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.

590) or jalousie relays (592).

The device works using the medium KNX IP.

It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects.

Also the KNX addressing scheme, based on individual device

address and group objects, is unchanged.

An easy to read OLED display on the front panel enables a manual operation to test the installation.

The MDT Object Controller 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.

The comfort range of the room climate is defined using Min / Max values when parameterising the object controller.

Switch actuators / heating actuators can be controlled by the object controller along with thermal actuators or motorised KNX actuators.

The MDT Object Controller 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.

The comfort range of the room climate is defined using Min / Max values when parameterising the object controller.

Switch actuators / heating actuators can be controlled by the object controller along with thermal actuators or motorised KNX actuators.

For visualization of current building states and interactive control of building functions via Android or iOS App.

Visu Control for KNX app available free of charge in the Android and iOS store.

App suitable for smartphone and tablet with automatic setting of the respective view.

The STEP POWER KNX bus power supplies with integrated color display and an active KNX choke circuit for greater efficiency are the professional solution for smart building automation with KNX. The compact devices are economical, space-saving, and flexible in application.

• Input Voltage: 100 VAC - 240 VAC
• Nominal Output Current: 640 mA
• With display
• Parameters readable via KNX Bus: No
• Din modules (width): 3
• UL: UL/C-UL Listed UL 61010-1 and UL/C-UL Listed UL 61010-2-201

• The device may be used for permanent interior installations in dry locations within distribution boards or small casings with DIN rail EN 60715-TH35. 
• To ensure an uninterrupted power supply a separate circuit with safety separation should be used for the power supply unit power supply line.

640 mA Power supply.

Installation Instructions

• The device may be used for permanent interior installations in dry locations, within distribution boards or small casings with DIN rail.

640 mA Power supply with integrated KNX node, diagnosis and logical functions.

Application area

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm).

The device has a bus choke and additionally provides an output for auxiliary power.

The integrated KNX node monitors output current, bus voltage and the temperature in the enclosure. Various logic functions are available for application purpose.

The configuration is done with the ETS (version 4.2 or higher).

An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.

640 mA Power supply with integrated USB interface, KNX node, and diagnosis functions.

Application area

The KNX PowerSupply USB 367 is a 640 mA power supply with an integrated USB interface and a small footprint of only 4 TE (72 mm).

The device has a bus choke and additionally provides an output for auxiliary power.

The USB interface allows establishing a bidirectional connection between a PC and the KNX bus.

The USB connector has a galvanic separation from the KNX bus.

Both ETS (Version 4.2 or later) and visualization tools support this interface.

The KNX node monitors output current, bus voltage and the temperature in the enclosure.

The configuration of the device is done with ETS.

An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.

IP44 Presence detector with 2 sensors.

Version for installation in hollow ceilings.

Presence detector with 3 sensors and temperature sensor.

Version for installation in hollow ceilings.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.